검색결과 리스트
글
[Ableton/업데이트]Ableton Live 9.7b3 Release note
설정
트랙백
댓글
9.7b3 Release Notes
Bugfixes:
-Live would crash at startup if the preferences were corrupted.
Changes for Push:
-The Push 2 display process would not start on Windows, if non-standard unicode characters were contained in the user profile name.
-Page Left/Right buttons are now available in the Step Sequencer for Simpler in Slice mode.
-The Push 2 firmware has been updated to 1.0.60. It now automatically adjusts the LED white balance for units produced in the factory from April 2016.
-Fixed an error when changing audio routings on Push 2.
-It's now possible to adjust the Input and Output MIDI routing from Push 2.
-Improved scrolling through Input or Output targets when changing routings from Push 2.
-Pressing Record on Push would stop a Clip if the Clip Launch Mode was set to "Toggle".
-Routing meters would not reflect clipping signals on external inputs correctly.
-When changing Layout, the Step Sequencer page would reset.
-Clip phase would overflow when changing Clip length during playback.
-Push would allow editing Chain Mixer parameters when the Rack was frozen. This has been corrected.
MJ메카의 평화로운 블로그(Naver)에 방문하시면 모바일(Naver Blog앱)에 최적화된 원본 게시물들을 깔끔하고 빠르게 받아보실수 있습니다.
런치패드 연구소(Launchpad Lab) 네이버카페에 오시면 더 많은 Ableton, 런치패드 등에 관한 정보와 게시물들을 확인하실수 있습니다.
[Launchpad Lab (Facebook)]
'Ableton Live > Ableton Live 업데이트' 카테고리의 다른 글
[Ableton/업데이트]Ableton Live 9.7B2 Release note(9.7 베타빌드2 추가정보+번역) (0) | 2016.08.03 |
---|---|
[Ableton/업데이트]Ableton Live 9.7b1 release note(9.7베타빌드1 추가정보 번역) (0) | 2016.07.22 |
글
[Ableton/업데이트]Ableton Live 9.7B2 Release note(9.7 베타빌드2 추가정보+번역)
설정
트랙백
댓글
Bugfixes:
-Fixed a crash which might occur when creating a time selection on Group tracks in Arrangement View.
-Live might run into issues when writing files to disk on Windows, if the file path contained non standard unicode characters.
Changes for Push:
-When in Slicing mode, 'Split Slice' is now in place of 'Crop'.
-The step sequencers might malfunction when odd time signatures were in use.
버그수정:
-Arrangement view에서 Group트랙에 시간 선택을 만들 때 크래시가 발생하는 오류 수정.
-파일 경로에 비 표준 유니 코드 문자가 포함되어있는 경우 라이브에서 윈도우 디스크에 파일을 기록 할 때 문제가 발생할수 있습니다.
Push 관련 업데이트사항:
-Slicing mode에서의 'Split Slice'가 'Crop'에 위치합니다.
-잘못된 박자표가 사용되었을때 "Step Sequencer"가 오작동할수 있습니다.
[다른버젼의 Release Note 번역본 링크]
[9.7b1 Release note](현재 번역중)
[9.7b2 Release note](영문)
런치패드 연구소(Launchpad Lab) 네이버카페에 오시면 더 많은 Ableton, 런치패드 등에 관한 정보와 게시물들을 확인하실수 있습니다.
'Ableton Live > Ableton Live 업데이트' 카테고리의 다른 글
[Ableton/업데이트]Ableton Live 9.7b3 Release note (0) | 2016.10.20 |
---|---|
[Ableton/업데이트]Ableton Live 9.7b1 release note(9.7베타빌드1 추가정보 번역) (0) | 2016.07.22 |
글
[Ableton/업데이트]Ableton Live 9.7b1 release note(9.7베타빌드1 추가정보 번역)
설정
트랙백
댓글
9.7b1 Release Note
-The Link beat time will be realigned when starting Live’s playback with Tap Tempo or via Looper.
-New Simpler Slicing modes (Beat, Region, Manual) are now available.
-As a consequence of the new Simpler features, Live Sets created with this version cannot be opened with previous versions anymore.
Bugfixes:
-When resizing the left edge of a frozen Clip to the left, audio would still begin playback from the Clip’s former start position.
-Live would crash when canceling a freeze action, if this was performed on a previously frozen and flattened Clip.
Changes for Push:
-The new Simpler Slicing modes are available on Push.
It is now possible to set the color for Tracks, Clips and Drum Rack pads from Push 2.
-It is now possible to adjust the Input and Output audio routing and the Monitoring state from Push 2. This is accessible via Track Mix Mode, where a dedicated ‘Input & Output’ button is added.
-Introduced a third layout for Drum Racks and Simpler’s Slicing mode, which enables triggering the currently selected pad / Slice with 16 pre-defined velocities.
-When transport is active, a progress bar on the display indicates the playback phase for each of the currently playing Clips.
-Added a visual feedback for the count-in on the Push 2 display.
-The Push 2 Firmware has been updated to version 0.59. This delivers a new pad algorithm that improves the sensitivity of Push pads when playing with wrist pressure. It also contains a fix for cases where Push 2 buttons might double-trigger, and improves the stability of the MIDI data sent from the Push encoders.
-Improved the matching between pad and display colors on Push 2.
-Improved the matching between Live and Push 2 colors.
On Push 2, the color white in Live is translated as yellow, since white is used to indicate selection.
-The intensity of the LEDs in the lower display buttons has been dimmed to create more contrast against the currently selected track.
-Improved the performance when moving the Session Ring horizontally with Push.
-When routing via Push 2, Pre FX, Post FX and Post Mixer routings are available in a separate list, in order to reduce the amount of routing sources.
-When the focus is set to Arrangement View, 'New' is not available on Push anymore.
-The Push Record button now takes into account Live’s focus on Arrangement and Session View. If the focus is on Arrangement View, the Session Record button will trigger Global Recording, while the Shift + Record button will trigger / stop Session Recording. The logic is reversed when focused on Session View.
-Session Record and Arrangement Record are now independent from each other.
Different sensitivities are in place for the Push 2 pad matrix, depending on the function of the pads in the current layout. This is specifically aimed at avoiding inadvertently changing the loop selector while playing Drum Rack pads.
-It is now possible to delete the currently selected Clip in Arrangement via Push 2.
-If the selected Clip was in Arrangement View, Push 2 would not display its content in Clip View.
-When step-sequencing a Clip in Arrangement View, the playhead would not be shown on Push 2.
-When a Drum Rack or Instrument Rack was frozen, it was still possible to edit the Chain's mix parameters.
The Clip length would not be displayed in Clip View, when performing a recording with Fixed Length.
-Tap Tempo 혹은 via Looper을 사용하여 재생하는경우 Link의 Beat시간이 재편성됩니다.
-Simpler의 새로운 슬라이싱 모드가 사용 가능해졌습니다.(Beat, Region, Manual)
-Simpler에서 새로운 기능이 추가된 결과로인해 9.7이상의 버젼에서 만든 프로젝트파일은 9.7미만(9.0.0~9.6.x 혹은 그 아래)에서 열리지 않습니다.
Bugfixes: 버그 수정:
-왼쪽 고정클립에서 왼쪽 모서리의 크기를 바꿀 경우, 오디오는 여전히 이전 재생위치에서 계속 재생됩니다.
-Track Freeze를 캔슬링했을때 이 트랙이 이미 동결과 평탄화(Freeze, Flat)되어있었다면 Ableton Live에서 크래시가 발생할것입니다.
Push2 관련 업데이트사항(현재 미번역):
Push2 관련 업데이트사항(현재 번역중):
-Push2에서 새로운 Simpler의 Slice모드를 사용할수 있습니다.
-푸시2에서 트랙, 클립, Drum Rack 패드의 색을 지정할수 있습니다.
-Push2에서의 I/O 오디오라우팅과 모니터링상태를 조절할수있습니다. 이것은 추가된 전용 Input&Output버튼을 통해 Track Mix모드에 접근할수 있습니다.
-Introduced a third layout for Drum Racks and Simpler’s Slicing mode, which enables triggering the currently selected pad / Slice with 16 pre-defined velocities.
-Transport가 활성화될경우 Push2의 디스플레이에 진행바가 현재 재생중인 각 클립의 진행단계를 표시합니다.
-Push2의 디스플레이에 카운트에 대한 시각적 피드백이 추가되었습니다.
-The Push 2 Firmware has been updated to version 0.59. This delivers a new pad algorithm that improves the sensitivity of Push pads when playing with wrist pressure. It also contains a fix for cases where Push 2 buttons might double-trigger, and improves the stability of the MIDI data sent from the Push encoders.
-버튼과 디스플레이와의 매칭(일치) 개선.
-Improved the matching between Live and Push 2 colors.
On Push 2, the color white in Live is translated as yellow, since white is used to indicate selection.
-The intensity of the LEDs in the lower display buttons has been dimmed to create more contrast against the currently selected track.
-Improved the performance when moving the Session Ring horizontally with Push.
-When routing via Push 2, Pre FX, Post FX and Post Mixer routings are available in a separate list, in order to reduce the amount of routing sources.
-When the focus is set to Arrangement View, 'New' is not available on Push anymore.
-The Push Record button now takes into account Live’s focus on Arrangement and Session View. If the focus is on Arrangement View, the Session Record button will trigger Global Recording, while the Shift + Record button will trigger / stop Session Recording. The logic is reversed when focused on Session View.
-이제 Session 녹음과 Arraingement 녹음이 독립적입니다.
-Different sensitivities are in place for the Push 2 pad matrix, depending on the function of the pads in the current layout. This is specifically aimed at avoiding inadvertently changing the loop selector while playing Drum Rack pads.
-Arraingement view에서 현재 선택된 클립을 Push2를 통해 삭제하는것이 가능해졌습니다.
-선택된 클립이 Arrangement view에 있었다면 Push2는 Clip view에서 해당 컨텐츠를 표시하지 않을것입니다.
-When step-sequencing a Clip in Arrangement View, the playhead would not be shown on Push 2.
-Instrument Rack혹은 Drum rack이 동결되어있어도 Chain의 mix파라미터를 수정할수 있습니다.
-고정된(혹은 수정된) 길이에서 녹음을 수행할경우 Clip View에서 클립의 길이가 표시되지 않습니다.
MJ메카의 평화로운 블로그(Naver)에 방문하시면 모바일(Naver Blog앱)에 최적화된 원본 게시물들을 깔끔하고 빠르게 받아보실수 있습니다.
런치패드 연구소(Launchpad Lab) 네이버카페에 오시면 더 많은 Ableton, 런치패드 등에 관한 정보와 게시물들을 확인하실수 있습니다.
'Ableton Live > Ableton Live 업데이트' 카테고리의 다른 글
[Ableton/업데이트]Ableton Live 9.7b3 Release note (0) | 2016.10.20 |
---|---|
[Ableton/업데이트]Ableton Live 9.7B2 Release note(9.7 베타빌드2 추가정보+번역) (0) | 2016.08.03 |
RECENT COMMENT